With wooden double hung windows, if the window weights are not working properly, the windows can be difficult to open or close. Most of the time a few sash cord repairs are all that are needed to get the windows working correctly again.
Many older wooden windows have sash weights. These iron weights are connected to either side of the window by means of a cord that loops over a pulley that is attached in the upper part of the window frame. The weights are located inside the wall behind the window frame.
The cords deteriorate over time and may eventually fray or break. The counterbalance of the weight is necessary for the window to operate properly. The broken cords make the window difficult to operate and make a prop necessary to keep the window in an open position.
Most homeowners find that sash cord repairs are easy enough to do. Windows have an access opening in the frames that allow you to make the repairs without removing the entire window assemble from the wall. You will need to remove the lower window from the assembly to access the weight opening.
To remove the window pane, begin by removing the wood trim that keeps it in place. Use a utility knife to cut through the paint that may be holding it in place and slide a putty knife between the window frame and the trim. Remove the trim from both sides of the window. If there is a metal channel that holds the window in place, it needs to also be removed also. At this point, you should be able to lift the window pane out of its place. If the second sash cord is still in place just cut it to remove the window. You should replace both cords at the same time.
Once the new cords have been attached to the window and weights, you are ready to put the window back together again. Reverse the steps for removing the lower portion of the window and you should have a window that is in great working order.
Many older wooden windows have sash weights. These iron weights are connected to either side of the window by means of a cord that loops over a pulley that is attached in the upper part of the window frame. The weights are located inside the wall behind the window frame.
The cords deteriorate over time and may eventually fray or break. The counterbalance of the weight is necessary for the window to operate properly. The broken cords make the window difficult to operate and make a prop necessary to keep the window in an open position.
Most homeowners find that sash cord repairs are easy enough to do. Windows have an access opening in the frames that allow you to make the repairs without removing the entire window assemble from the wall. You will need to remove the lower window from the assembly to access the weight opening.
To remove the window pane, begin by removing the wood trim that keeps it in place. Use a utility knife to cut through the paint that may be holding it in place and slide a putty knife between the window frame and the trim. Remove the trim from both sides of the window. If there is a metal channel that holds the window in place, it needs to also be removed also. At this point, you should be able to lift the window pane out of its place. If the second sash cord is still in place just cut it to remove the window. You should replace both cords at the same time.
Once the new cords have been attached to the window and weights, you are ready to put the window back together again. Reverse the steps for removing the lower portion of the window and you should have a window that is in great working order.
About the Author:
Want to know how to get your windows working properly? sash cord repairs could be your solution. Learn how to repair sash cords right now and fix your window problems today!
0 comments:
Post a Comment